Futian Small Truck Kitchen Waste Truck

Barreled "swill" is slowly transported up the conveyor belt of the vehicle and poured into the carriage (which can be divided into a carriage and a tank) at the top of the vehicle. The thrown garbage is squeezed by a strong push plate, and then solid-liquid separation is carried out. The separated liquid enters the sewage tank at the bottom of the tank, and the solid garbage is compressed and stored in the tank, reducing its volume. After repeated filling, it is sent to the kitchen waste resource optimization treatment plant. The entire process is automated. The classification, collection, and centralized treatment of kitchen waste not only require harmless and resourceful treatment equipment in the later stage, but also specialized vehicles for collection and transportation. Due to the high moisture content and complex composition of kitchen waste, vehicles are required to have good airtightness, easy and safe operation, high loading and unloading efficiency and convenience, and to be matched with later resource utilization equipment.

Category project parameters or configurations
Vehicle parameters Product model DKV5040TCAB6
External dimensions [length x width x height (mm)] 5250 * 2050 * 2500
Curb weight (kg 31803330
Rated load capacity (kg 11851035)
Maximum total mass (kg 4495
2 rated members
Chassis parameters chassis model BJ1045V9JB5-54
Chassis manufacturer Beiqi Foton Automobile Co., Ltd
Engine model Q23-115C6
Engine power (kW) 85/97
Wheelbase (mm) 28503360
Tire 6.50 steel wire tire
5-speed transmission
Special parameter tank effective volume (m3) 3
Multi way valve Zhongmei/Weisenbole multi way valve
Oil pump Anhui liquid oil pump
Oil cylinder Weisenbole
Operation mode: electronic control/manual/remote control